How To Tighten Sperry Boat Shoes: A Step-by-Step Guide

If your Sperry boat shoes are feeling a bit loose or slipping off your feet, don’t worry. Tightening them is easy and can be done in just a few simple steps.

Step 1: Adjust the Laces

The first step in tightening your Sperry boat shoes is to adjust the laces properly. Make sure that the laces are not too loose or too tight. If the laces are too loose, your feet will slip out of the shoes easily. If the laces are too tight, it can cause discomfort and pain.

image 18

Step 2: Tie the Knot

Once you have adjusted the laces, the next step is to tie the knot. There are several ways to tie a knot for Sperry boat shoes. One popular way is the fishtail knot. Insert the laces into the eyelets running vertically.

Cross your laces and bring each side up and over the loop on the opposite side. Repeat this step three times. You can also try the barrel knot or the tassel knot.

Step 3: Make Adjustments as Needed

After tying the knot, check the fit of your Sperry boat shoes. If they are still loose, you can make further adjustments by tightening the laces more or trying a different knot.

Remember to always adjust your Sperry boat shoes according to your comfort level. Tightening them too much can cause pain and discomfort, while keeping them too loose can make it difficult to walk or cause your feet to slip out of the shoes.

How To Tie Sperry Laces

Tying Sperry laces is a simple process that can be done in just two easy steps:

  1. Take the left lace of either shoe in your hand and fold it over itself to create a loop. Leave a 3 to 4 inch tail on the end of the loop.
  2. Twist the loop and wrap the remaining lace around it five times. Thread the end of the lace through the end of the loop and pull the end of the lace while pushing the knot to tighten. Trim any excess lace.

It is important to note that there are different ways to tie Sperry laces, such as the Chain Boat Shoe Knot and the Tassel Knot. However, the method described above is the most common and simple way to tie Sperry laces.

When tightening your Sperry laces, it is important to make sure they are snug but not too tight. You want to be able to comfortably move your feet and not feel constricted.

Check out the video

How to Tie Boat Shoes

  1. Start by threading the lace through the first eyelet, starting at the bottom and working your way up. Make sure both ends of the lace are even.
  2. Cross the right lace over the left lace and tuck it behind the left lace. Then, bring the right lace over the left lace again and pull it through the loop you just created. This creates the first knot.
  3. Now, tie a second knot by making a loop with the left lace and crossing the right lace over the left lace. Tuck the right lace behind the left lace, then bring it over the left lace again and pull it through the loop you just created. Tighten the knot by pulling both ends of the lace.

Congratulations, you’ve just tied your Sperry boat shoes!

How To Break In Sperrys

Here are two easy steps to help you break in your Sperrys:

Checkout this video
  1. Wear Them Around the House

You can wear them with or without socks, depending on your preference. Keep in mind that wearing socks will make the shoes feel tighter, while going barefoot will allow the leather to stretch more.

  1. Soak Them in Water

Fill a spacious container with about 6 inches of warm water, and then submerge your shoes in the water for about 10 minutes. This will help to soften the leather and make it more pliable. After soaking, let the shoes air dry naturally, and avoid using any heat sources like a hair dryer or radiator.

Remember, breaking in your Sperrys takes time and patience. By following these two easy steps, you can break in your Sperrys and enjoy comfortable, stylish footwear for years to come.

Sources: Style and Run, WikiHow, Sperry

image 24

Do Sperrys Run Big Or Small?

When it comes to Sperry boat shoes, you might be wondering whether they run big or small. The answer is that Sperrys tend to run big in terms of length, but true to size in the forefoot for most people.

If you’re buying Sperry leather shoes, consider buying a half size down from your regular size, as leather will stretch over time. On the other hand, if the shoes are made of synthetic materials, get your normal size, as synthetic materials won’t stretch and are constructed to hold their shape.

It’s important to note that while Sperrys may run big in the heel part, they have an amazing feature to prevent heels from hitting.

image 23

How Should Boat Shoes Fit?

You want to make sure that your shoes are snug enough to stay on your feet, but not so tight that they cause discomfort or blisters.

1. Sizing

Sperry boat shoes typically run true to size, but it’s always a good idea to try them on before you buy. If you’re unsure about your size, refer to Sperry’s sizing chart or visit a store to get measured.

2. Width

Sperry offers boat shoes in standard and wide widths, so make sure you choose the one that fits your foot best.

3. Toe Box

The toe box should be roomy enough for your toes to move around comfortably, but not so loose that your foot slides forward and hits the front of the shoe.

4. Heel

The heel should fit snugly, but not be too tight.

5. Arch Support

Sperry boat shoes offer good arch support, which is important for people who spend a lot of time on their feet. Make sure the shoe provides enough support for your arches and feels comfortable.

It’s normal for them to feel a little tight at first, but they should loosen up after a few wears.

image 22

Do Sperrys Stretch?

If you’re wondering whether Sperrys stretch, the answer is yes, to some extent. Sperry boat shoes are usually made of leather or canvas, and both materials can stretch somewhat with wear.

Leather Sperrys will stretch more than canvas ones, as leather is a more pliable material. If you’re buying new leather Sperrys, it’s best to get them in a snug fit, as they will stretch up to half a size with wear. However, if you buy them too tight, they could end up being uncomfortable to wear.

Canvas Sperrys will also stretch with wear, but not as much as leather ones. They will usually stretch up to a quarter of a size, so it’s best to buy them in a slightly snug fit.

It’s important to note that Sperrys should not be stretched artificially, as this can damage the material and ruin the shoes. Instead, it’s best to break them in naturally by wearing them regularly and allowing them to mold to your feet over time.

Do You Wear Socks With Boat Shoes?

If you’re wearing them in a more formal setting, such as a business casual event or a wedding, it’s best to wear them with socks.

First, make sure the socks are thin and not too bulky. Thick socks can make your feet feel uncomfortable and cause blisters. Second, choose socks that complement the color of your shoes. If you’re wearing brown Sperry boat shoes, for example, choose socks that are a similar shade of brown or a complementary color like navy or gray.

If you’re wearing them in a more formal setting, it’s best to wear them with thin, complementary socks.

Do You Wear Socks With Sperrys?

Some people prefer to go sockless, others find that wearing socks with their Sperrys can make them more comfortable and help them last longer.

Wearing socks with Sperrys can help prevent blisters and chafing, especially if you’re breaking in a new pair. However, if you do choose to wear socks, it’s important to choose the right type. Look for thin, no-show socks that won’t show above the top of your shoes. You can also find socks specifically designed to be worn with boat shoes, such as those made by Boardroom Socks.

On the other hand, some people prefer to go sockless with their Sperrys, especially in warmer weather. Going sockless can give your feet a chance to breathe and can also give your outfit a more casual, relaxed look.

Ultimately, whether or not you wear socks with your Sperrys is a matter of personal preference. Try both ways and see which one feels more comfortable for you.

image 21

How Long Do Sperrys Last?

Sperry boat shoes are known for their durability and longevity. If you take care of them properly, they can last for several years. The lifespan of Sperrys depends on various factors such as the frequency of use, the quality of leather, and how well you maintain them.

According to Sperry’s official website, their boat shoes can last up to three years with proper care. However, some customers have reported that their Sperrys have lasted for more than three years, while others have claimed that their shoes only lasted for a few months.

  • Clean your shoes regularly with a soft brush or cloth to remove dirt and stains.
  • Apply a leather conditioner to keep the leather soft and prevent it from cracking.
  • Store your shoes in a cool and dry place to prevent moisture buildup.
  • Rotate your shoes and avoid wearing them every day to prevent excessive wear and tear.
  • Replace the insoles when they start to wear out to maintain the comfort and support of your shoes.

Remember, proper care and maintenance are essential for keeping your shoes in good condition.

image 20

Sperry On Feet

Sizing

To determine your shoe size, first measure the length of your feet using a measuring tape, and then refer to the Sperry size chart to compare the measurements.

Breaking Them In

They can be stiff and uncomfortable when you first start wearing them. To break them in, wear them around the house for a few days before wearing them outside.

Socks or No Socks

One of the great things about Sperry boat shoes is that they can be worn with or without socks. This will help prevent your feet from getting too hot and sweaty. If you prefer to go sockless, make sure to apply some foot powder to help absorb moisture and prevent odors.

Source: Sperry

checkout the video

Boat Shoe Knot

This knot is not only functional but also adds a touch of style to your shoes. To tie the boat shoe knot, follow these steps:

  1. Begin by threading the end of the lace through the end of the loop on the same side of the shoe.
  2. Take the other lace and thread it over the first lace, then under the loop and over itself.
  3. Pull both laces tight to create a knot.
  4. Take the lace that was originally threaded through the loop and tie a basic knot with the other lace.
  5. Tuck the knot under the loops and adjust as needed.
image 19

Sperry Sizing

When it comes to boat shoes, sizing is crucial.

1. Measure Your Feet

Measure the length and width of your foot at the widest point.

2. Consider the Material

Sperry boat shoes are available in a variety of materials, including leather, canvas, and suede. Each material has its own unique properties and may fit differently. For example, leather boat shoes will stretch and mold to your feet over time, while canvas shoes will not stretch as much.

3. Check the Sizing Chart

Be sure to consult the sizing chart before making your purchase to ensure the best fit.

4. Try Them On

If you are unable to try them on in person, be sure to order from a retailer with a good return policy in case the shoes do not fit properly.

Was this article helpful?
YesNo