So you’ve decided to reupholster your wingback chair. Great decision! But how do you go about it?
1: Measure the Size of the Chair
You’ll need to measure the size of your wingback chair before you can start reupholstering. Use a tape measure to make sure you have the correct size.
Get the Right Fabric
Many different fabrics can be used for reupholstery, so it’s important to find the right one for your chair. Try to get a fabric that is comfortable and looks good.
2: Purchase the Right Supplies
Wingback chairs can be a great addition to any home, but they can quickly wear down due to the use that they’re put through. Purchasing the right supplies is important to get the job done correctly if you’re looking to reupholster a wingback chair. Here are some things to keep in mind when purchasing your supplies:
- The type of fabric you choose: A good option would be a stretch fabric like vinyl or polyester, as these materials are resistant to wear and tear.
- You’ll need tools: A seam ripper, needle and thread, sandpaper or a wood block.
- The time it will take: Depending on the size of your chair and the complexity of the repairs, it could take several hours or even days to complete the job.
3: Remove the Old Covering
If your wingback chair has an old covering, you may consider removing it before reupholstering. This will give you more room to work and make the job go much faster.
If your wingback chair doesn’t have an old covering, you can remove the fabric and batting and start reupholstering from there. Use the right fabric and batting for your chair, as not all wingbacks are created equal.
4: Clean the Chair
After re-upholstering the wingback chair, it is important to clean the chair. Use a mild soap and water solution to clean the fabric. Make sure to rinse off all of the soap before leaving the chair to dry.
5: Attach the New Covering
When it comes to reupholstering a wingback chair, there are a few different ways that you can go about it.
- One option is to buy a new cover and replace the old one simply. However, this can be somewhat expensive and may not be the easiest or most convenient option.
- Another option is to take apart the chair and replace the covering piece by piece, which can be more time-consuming and less expensive.
6: Apply Glue and Screws
If you’re looking to reupholster a wingback chair, there are a few things you’ll need to do first. First, you’ll need to apply glue and screws to the back of the chair. Once that’s done, you can start recovering the chair with fabric.
There are many different ways to do this, depending on what kind of look you’re going for. You can choose from traditional patterns or more modern designs.
Take your time and ensure the finished product looks perfect, whichever route you choose!
7: Let It Dry!
The wingback chair is a popular furniture style that has been around for many years. It is a simple design with two pieces of furniture connected by a curved wood. The chair can be reupholstered in many different ways, but the final step is to let it dry.
This step is important because if the materials are not allowed to dry properly, they can warp or rot. You can wait as long as you want, but it’s best to let the chair finish drying overnight.
Tips for Reupholstering a Wingback Chair
Wingback chairs are a popular choice for modern homes and can be used in many different settings. If you want to update your wingback chair, you should keep a few things in mind.
- First, make sure the fabric is in good condition. Worn or frayed fabric can be more difficult to reupholster than new fabric, so take care when selecting your material.
- Second, consider the shape of the chair. Some wingbacks have arms that are longer than others, so you’ll need to account for that when choosing your fabrics.
- Finally, think about the look you’re going for. A soft and comfortable upholstery style is perfect for a living room or bedroom, while a more retro look can be achieved with a tougher fabric and traditional trimming.
With these tips in mind, giving your wingback chair a new lease on life is easy!
- Get a good quality fabric.
- Cut the fabric to size.
- Apply a seam tape layer to the chair’s back.
- Cover the seams with a layer of fabric.
- Trim the excess fabric and finish the edges with a zigzag or serge stitch