How To Measure Hollow To Floor For Dress: A Step-by-Step Guide

Materials Needed

  • Measuring tape
  • Pen or pencil
  • Paper


  1. Put on the shoes that you plan to wear with the dress. This will ensure that the dress is the correct length.
  2. Stand up straight with your feet together.
  3. Have someone else measure from the hollow at the base of your neck to the floor. The hollow is the indentation between your collarbones.
  4. Make sure that the measuring tape is straight and parallel to the floor.
  5. Keep your legs straight and close together while being measured.
  6. Write down the measurement on a piece of paper.

When it comes to buying a dress, getting the right fit is essential. One important measurement that you need to know is the “hollow to floor” measurement.

This measurement helps determine how long the dress should be from your collarbone (hollow) down to the floor.

To measure your hollow to floor accurately, start by standing straight with bare feet and wearing thin clothing. Have someone assist you in measuring from the hollow of your collarbone down to where you want the hem of your dress or gown to fall naturally at your feet.

Keep in mind that this measurement should be taken while wearing shoes with a similar heel height as what you plan on wearing with your dress. By following these simple steps, you can confidently find a dress that fits perfectly and flatters your figure.

white and beige floral textiles
Photo by Anna Docking on Unsplash

What is Hollow to Floor Measurement?

  • The hollow to floor measurement is an important measurement used in determining the length of a dress or gown.
  • It refers to the vertical distance from the hollow point at the base of your neck to the floor, while you are standing straight with bare feet together.
  • This measurement helps ensure that a dress or gown will be tailored and fitted correctly, especially for formal occasions such as weddings, proms, or evening events.

To measure your hollow to floor correctly, follow these steps:

  1. Stand upright on a flat surface with your bare feet together.
  2. Place one end of a measuring tape at the base of your neck’s hollow point. The hollow point is usually located between your collarbones.
  3. Hold the other end of the measuring tape down towards the floor so that it hangs vertically.
  4. Make sure that the measuring tape is straight and not slanted or curved.
  5. Take note of where it reaches on the floor. This will be your hollow to floor measurement.

It’s essential to have an accurate measurement because dresses are often made based on standard sizing charts provided by manufacturers. By providing them with your correct measurements, you can ensure a better fit when ordering online or having a dress custom-made.

Remember these tips when taking this specific body measurement:

  • Wear undergarments similar to those you plan on wearing with your dress or gown for accurate results.
  • Ask someone else for assistance if needed; they can help hold and position the measuring tape correctly.

In conclusion, knowing how to measure your “hollow to floor” accurately allows you to choose dresses that fit well and flatteringly showcase your figure during special occasions.

Why is Hollow to Floor Measurement Important for Dresses?

  • Accurate measurement: The hollow to floor measurement is crucial when it comes to ordering a dress that fits perfectly. It ensures that the dress will be tailored precisely based on your body proportions.
  • Length customization: By providing the correct hollow to floor measurement, you can customize the length of your dress according to your preference. Whether you want a full-length gown or a shorter hemline, this measurement helps in achieving the desired look.
  • Avoid alterations: Getting an accurate hollow to floor measurement reduces the need for extensive alterations later on. With precise measurements, you can avoid additional costs and save time by receiving a dress that requires minimal adjustments.
  • Proportional fit: Each individual has unique body proportions, and using standard sizing charts may not always provide an ideal fit. The hollow to floor measurement allows designers or manufacturers to create dresses that are proportionate from top to bottom, ensuring a flattering silhouette.
  • Dress style considerations: Different dress styles have varying lengths and designs. Knowing your exact hollow to floor measurement enables you to choose styles that will look best on you. For example, if you prefer high heels with longer dresses, providing an accurate measure will ensure the appropriate length even when wearing heels.

To measure your hollow-to-floor correctly:

  1. Stand barefoot in undergarments.
  2. Place one end of the measuring tape at the base of your neck (hollow) and extend it down vertically towards the floor.
  3. Make sure the tape is parallel with your body without being too tight or loose.
  4. Have someone assist you for more accurate results.
  5. Note down this value as it represents your “hollow-to-floor” measurement.

Remember, taking precise measurements guarantees a well-fitted dress that enhances both comfort and confidence on any special occasion!

Preparing for the Hollow to Floor Measurement

Follow these steps to ensure accurate measurements:

  1. Wear appropriate undergarments: Put on the undergarments that you plan to wear with your dress. This will give you a more accurate measurement and help determine how long your dress needs to be.
  2. Find a flat surface: Stand on a flat surface, preferably without shoes, such as hardwood or tile flooring. Avoid standing on carpet or uneven surfaces as they can affect your measurement.
  3. Gather necessary tools: You will need a measuring tape or a yardstick (preferably flexible) to take the hollow to floor measurement accurately.
  4. Enlist someone’s help: To get precise measurements, it is recommended to have someone assist you in taking the measurements. They can ensure that the tape measure is straight and aligned correctly.
  5. Stand up straight and relaxed: Keep your posture natural while standing tall with relaxed shoulders and arms by your sides.
  6. Locate the hollow point: The hollow point refers to the indentation between your collarbones above where your breastbone starts—this is typically one inch below where it meets at the base of your throat.
  7. Measure from the hollow point down:
  • Place one end of the measuring tape at this hollow point.
  • Let it hang straight down towards the floor.
  • Make sure that there are no kinks or bends in the tape.
  • Hold it taut against your body while keeping parallel alignment with both legs close together.
  • Read off where it touches (or should touch) ideally against either back heel if any discrepancy in height exists (hence why having assistance during this step can prove helpful).

This will help you find the perfect length and ensure a flattering fit.

Step-by-Step Guide

  1. Wear appropriate clothing: Put on the undergarments and shoes that you plan to wear with your dress. This will ensure accurate measurements.
  2. Find a measuring tape: Grab a flexible measuring tape or ruler that can easily wrap around your body.
  3. Stand up straight: Stand against a wall with your back straight and feet together. Keep your posture natural and relaxed.
  4. Locate the hollow point: The “hollow point” refers to the indentation between your collarbones, just above where your bust starts.
  5. Measure from hollow point to floor: While standing tall, have someone assist you in measuring from the hollow point down to the floor using the measuring tape or ruler. Ensure that it is perpendicular to the ground for an accurate measurement.
  6. Keep track of measurements: Write down this measurement in inches or centimeters, depending on which unit of measurement you prefer.
  7. Recheck for accuracy: Double-check that all measurements are correct before finalizing them as they will be used for ordering dresses online or providing custom measurements at stores.

Remember, it’s crucial to take precise measurements since inaccurate ones may lead to ill-fitting dresses when ordering online or getting alterations done later on.

Step 4: Locate Hollow PointIndentation between collarbones
Step 5: Measure from Hollow PointFrom hollow point downwards until reaching floor
Step 6: Record MeasurementWrite down measured length

Tips and Tricks for Accurate Hollow to Floor Measurements

Here are some tips and tricks that can help you measure this crucial dimension correctly:

  1. Wear Proper Undergarments: Before taking any measurements, make sure you are wearing the undergarments that you plan to wear with your dress. This will give you a more accurate measurement as different bras or shapewear may affect your overall height.
  2. Use a Measuring Tape: To achieve precise measurements, always use a flexible measuring tape instead of relying on guesswork or using a rigid ruler.
  3. Stand Straight: Stand up straight with your feet together and arms relaxed at your sides when taking the measurement. Keep your posture natural and avoid slouching or stretching upwards.
  4. Enlist Help from Someone: While it’s possible to measure yourself, having someone assist you can greatly improve accuracy by ensuring the tape is positioned correctly and not twisted.
  5. Find Your Hollow Point: The hollow point refers to the indentation between your collarbones just above where your sternum starts (also known as suprasternal notch). Locate this point accurately before starting the measurement process.
  6. Measure From Hollow Point Downwards: Place one end of the measuring tape at the hollow point and let it fall straight down towards the floor along with your body contours until reaching desired length specified for “hollow to floor.” Ensure that no part of the tape is being pulled tight or hanging loose during this process.
  7. Avoid Tilting Your Head Up/Downward: Maintain eye level while being measured; tilting your head up or down can lead to inaccurate results due to changes in spinal alignment.

Remember, these tips are meant as general guidance and may vary depending on specific dress requirements or personal preferences.

Common Mistakes to Avoid When Measuring Hollow to Floor

Here are some key points to keep in mind:

  1. Using a Flexible Tape Measure: It is essential to use a flexible tape measure when measuring the hollow to floor. Using a rigid or non-flexible tape measure may result in inaccurate measurements.
  2. Measuring Over Clothing: Always ensure you take your measurements over bare skin or thin undergarments, without any bulky clothing on. Measuring over thick or layered clothing can add extra inches and lead to an ill-fitting dress.
  3. Incorrect Starting Point: Start your measurement from the hollow point, which is located at the base of your neck between your collarbones, not from the top of your shoulder or neckline.
  4. Not Standing Straight: Stand up straight with good posture while taking the measurement. Slouching or leaning forward can affect accuracy and result in incorrect measurements.
  5. Neglecting Shoe Height: If you plan on wearing heels with your dress, consider their height while measuring the hollow to floor. This will ensure that you have enough length for proper fitting even with elevated footwear.
  6. Forgetting Allowance for Alterations: Remember that most dresses require alterations for a perfect fit, especially around bust and waist areas. Therefore, it’s wise not to order exactly according to your measured size but rather allow some room for adjustments by ordering slightly larger sizes if unsure.
  7. Rushing Through Measurements: Take time and be patient when measuring yourself or someone else for their hollow-to-floor dimensions; rushing through this process may lead to errors and inaccuracies that could impact how well the dress fits in reality.

Choosing the Right Dress Size Based on Your Hollow to Floor Measurement

Measure from the Hollow:

  • Stand straight with your feet together and your back against a wall.
  • Locate the hollow area between your collarbones at the base of your neck.
  • Place one end of a measuring tape at this point.

Take Accurate Measurements:

  • Extend the measuring tape down towards the floor until it reaches where you want your dress hemline to fall.
  • Ensure that the tape is parallel to the floor and doesn’t sag or droop.

Note Down Your Measurements:

  • Write down this measurement in inches or centimeters.
  • Make sure it’s accurate and double-check if needed.

Referencing Dress Size Charts:

  • Consult a size chart provided by clothing brands or retailers for guidance.
    • Example: Hollow to Floor (inches) Dress Size 55-57 2 58-60 4 61-63 6

Consider Additional Factors:

While using size charts as reference points can be helpful, remember that additional factors like body shape, height, and personal preference may influence which dress size suits you best.

By following these steps and accurately determining your hollow-to-floor measurement, choosing an appropriate dress size becomes much easier.

Remember that sizes can vary between different brands or designers; therefore, always refer specifically to their respective sizing charts for precise measurements.

Was this article helpful?